- Products
- Suggested Systems
Suggested Systems
- ACM100 - Alternating Current Monitor
- DCM100 - Direct Current Monitor
- FFM100 - Fluid Flow Monitor
- FPM100 - Fluid Pressure Monitor
- GPS200 - Antenna/Receiver
- J2K100 - J1939 to NMEA 2000 Gateway
- NBE100 - Network Bus Extender
- RAA100 - Rudder Angle Adapter
- SSC300 - Solid State Compass
- SMS100 - Text Messaging
- Support
Support & Downloads
Need help?
- Company
SMS100 Examples – Intermediate System
Overview
Every year we hear of boats sinking, catching fire, having cold conditions freeze the onboard water supply, or being broken in to. Most of these happen at the dock, while the vessel is unattended. While adding vessel monitoring equipment and door alarms can detect these problems, they do not solve the problem of informing you that there is a problem if you are not on board (or at least close by). Adding a Maretron® SMS100 text module to your vessel gives an inexpensive method of sending text messages to your phone when there is a problem.
This intermediate remote monitoring system will monitor important parameters on your vessel and alert you via text message when there is water in your bilge, a fire onboard, doors opened, loss of shore power or battery power, or your boat moves from its moorings. While on board, all these parameters can be displayed on the sunlight readable display.
The following table shows the products included within this example system plus a list of the information or data available for display.
Product | Description | Available Data List |
DSM250 | Helm pod display | Displays data in this list, monitors the data and if there is a problem will sound an internal buzzer and send a text message to the SMS100. |
SMS100 | Texting module | Sends text messages to one or more phone numbers when any monitored data in this list goes outside programmed limits |
GPS200 | Cabin top GPS | Position, speed over ground, course over ground, time, date, magnetic variation and more |
WSO100 | Wind/weather station | Measures wind speed and direction, outdoor air temperature, outdoor humidity, barometric pressure |
SIM100 | Switch indicator | 3 high bilge water indicators, magnetic door switch, smoke/heat detector, CO detector |
DCM100 | Battery monitor | Monitors battery voltage, current, temperature, state of charge and time remaining |
ACM100 | Shore power monitor | Monitors voltage, current, frequency and power |
TMP100 | Temperature monitor | Monitors cabin temperature, engine room temperature, alternator temperature, refrigerator temperature |
Downloads
This file requires Maretrons free NMEA 2000® network design tool N2KBuilder® to be installed on your PC.
Text message screenshots
The following screenshots are examples of Text Messages you can receive when monitoring these values.
Boat Moving Alarm
Door Open Alarm
High Bilge Water Alarm
High Wind Alarm
Low Barometric Pressure
Low Battery Alarm
Low Cabin Temperature
Shore Power Fail
Smoke Alarm
Status response
DSM250 screenshots
The following screenshots are examples of how monitored data can be displayed on the DSM250.
Alternator Temperature Gauge
Apparent Wind Close Hauled
Apparent Wind Rose
Apparent Wind Speed Graph
Atmospheric Pressure Graph Black
Atmospheric Pressure Graph White
Barometric Digital
Battery Current
Battery Parameters
Battery State Of Charge
Battery Temperature
Battery Voltage
Course Up Rose
GPS Status
Ground Wind Direction Digital
Ground Wind Direction Rose
Lat Lon
Local Date and Time
Moon
Outside Temp and Heat Index
Outside Temp and Humidity
Outside Temp Digital
Outside Wind Chill and Temp
Refrigerator Temp Gauge
Shore Power Current
Shore Power Frequency
Shore Power Values
Shore Power Voltage
Shore Tota lPower Used
SOG and COG
SOG Gauge
Sunrise Sunset
Switch Indicators Off
Switch Indicators Off Color
Switch Indicators On
Switch Indicators On Color
Temp Outside and Inside
TimeDateUTC
True Wind Gauge
True Wind Rose
True Wind Speed Digital
Variation