This comprehensive system provides security information including three motion detectors and three door/hatch switches. The display (TSM800C) running N2KView monitors the switch indicator (SIM100) and whenever motion is detected or a door/hatch is opened then the display shows a red indicator and the alarm buzzer (ALM100) is sounded to notify everyone onboard and to scare off intruders. If the power to the motion detectors is turned off or if the wires to the motion detectors or door switches are compromised, then the display shows a yellow indicator to let you know that there is a problem and a particular sensor isn’t working. The color scheme is configurable so you can pick a scheme that works best for you. The display can also signal the texting module (SMS100) to send out one or more text messages as a notification that someone is on the boat. A text message can also be sent if the GPS antenna (GPS200) indicates that the boat’s position has changed indicating theft or a broken mooring line. With an Internet connection, the display can send an email to one or more people indicating motion, an opened door, or the boat has moved outside a predetermined area. If a third party IP camera is installed, you can login remotely using a PC or mobile device to see who is onboard.
The following table shows the products included within this example system plus a list of the information or data available for display.
| Product | Description | Available Data List |
| TSM800C | 8″ Touchscreen Display | 8” touchscreen displays data in this list, monitors the data and sounds an external buzzer if there is a problem and sends a text message out via the SMS100 |
| SIM100 | Switch Indicator Module | Monitors switch closures like motion and magnetic door sensors |
| GPS200 | Cabin top GPS | Position, Speed Over Ground, Course Over Ground, Time, Date, Magnetic Variation, More |
| ALM100 | Alarm Buzzer | Sounds a loud buzzer when any monitored data in this list goes outside programmed limit |
| SMS100 | Texting Module | Sends text messages to one or more phone numbers when any monitored data in this list goes outside programmed limits |
| IPG100 | N2K to Ethernet | NMEA 2000 to Ethernet gateway |
| E2500 | WiFi Router | Allows monitoring wirelessly or wired onboard, or remotely with internet connection |
This file requires Maretrons free NMEA 2000® network design tool N2KBuilder® to be installed on your PC.
The following components are examples of how monitored data can be displayed on the TSM800C display using N2KView. The components are arranged on favourite screens at positions and sizes to suit the users needs. See N2KView web page for examples of full screenshots.
%20and%20Ready.png)
All Security Points Armed (Black) and Ready
%20and%20Ready.png)
All Security Points Armed (Green) and Ready
%20and%20Ready.png)
All Security Points Armed (White) and Ready
Clock
COG Head Up Rose
COG North Up Rose
Course Over Ground Digital
Engine Room Video with PTZ
GPS Status
Lat and Long
Lat and Long Degrees
Lat and Long DMS
Lazarette Door Wires Cut or Disconnected
Local Date
Local Date DMY
Local Date MDY
Moon Phase
Pilot House Door Open
Pilot House Door Wires Cut or Disconnected
Salon Door Open
Salon Door Wires Cut or Disconnected
Salon Motion Detected
Speed over Ground Digital
Speed over Ground Gauge
UTC Time
Video off Bow
Video off Stern
The following screenshots are examples of Text Messages you can receive when security alerts are generated.
Boat Moving Alarm
Door Open Alarm
