Engine Monitoring – Comprehensive System (One Engine)

Overview

This single engine comprehensive monitoring system provides RPM, boost and oil pressure, oil and coolant temperature, voltage, fuel rate, engine hours and more depending on the particular engine. The GPS antenna/receiver (GPS200) provides the vessel’s speed that allows the display to compute and show the fuel economy (gallons/hour or liters/kilometer). The 8” touchscreen monitors all the engine data and sounds the external buzzer if any parameter goes out of range. The data recorder gives a complete record of all monitored parameters.

The following table shows the products included within this example system plus a list of the information or data available for display.

Product	Description	Available Data List
TSM800C	Helm Display	8” Touchscreen displays data in this list, monitors the data and if there is a problem will sound external buzzer.
ALM100	Alarm buzzer	Sounds a loud buzzer when any monitored data in this list goes outside programmed limit
J2K100	Engine Monitor	Monitors RPM, boost and oil pressure, oil and coolant temp, voltage, fuel rate, hours, and more depending on the particular engine
GPS200	Cabin Top GPS	Position, speed over ground, course over ground, time, date, magnetic variation and more
VDR100	Vessel Data Recorder	Performance analysis, vessel tracking, preventative maintenance, warranty incident, and accident investigation

Downloads

N2KBuilder file

This file requires Maretron’s free NMEA 2000^® network design tool N2KBuilder^® to be installed on your PC.

N2KView components

The following components (click to enlarge) are examples of how monitored data can be displayed on the TSM800C using N2KView. The components are arranged on favourite screens at positions and sizes to suit the users needs. See N2KView web page for examples of full screenshots.