This intermediate system provides vital information for a starter battery and house battery including voltage, current, state of charge, and battery temperature. If the either battery voltage drops to an unacceptable level, the display (DSM250) can detect the problem and instruct the text module (SMS100) to send a text message.
The following table shows the products included within this example system plus a list of the information or data available for display.
| Product | Description | Available Data List |
| DSM250 | Helm Pod Display | Displays data in this list, monitors the data and sounds an internal buzzer if there is a problem |
| DCM100 | Starter Battery | Monitors voltage, current, state of charge and battery temperature |
| DCM100 | House Battery | Monitors voltage, current, state of charge and battery temperature |
| SMS100 | Texting module | Sends text messages to one or more phone numbers when any monitored data in this list goes outside programmed limits |
This file requires Maretron’s free NMEA 2000® network design tool N2KBuilder® to be installed on your PC.
The following screenshots are examples of Text Messages you can receive when monitoring battery status.
Low Battery Alarm
The following screenshots are examples of how the battery status will be displayed on the DSM250.
Battery Current Gauge
Battery Parameters
Battery State Of Charge Gauge
Battery Temperature Gauge
Battery Voltage Gauge
