This section contains demonstration versions of Maretron software products and software emulation versions of Maretron hardware display products.
Download and install Maretron's N2KView® vessel monitoring and control system to see the wide variety of vessel monitoring data that can be brought to any network-connected PC, tablet or smart phone. This is the same software as a full functioning version of N2KView®, and may be licensed without the need to re-install for full operational use.
First, download and install Adobe AIR from airsdk.harman.com/runtime, and then download N2KView® using the above link.
This is a PC-based demonstration program for the DSM250, or DSM410 hardware display. You can download and install this to test-drive any of the DSM displays and experience the wealth of information the DSM250/DSM410 can deliver anywhere on the vessel.
This section contains the Windows device driver for the Maretron USB100.
This digitally signed driver for the Maretron USB100 NMEA 2000®/USB gateway is compatible with Windows 7/8/10 32-bit and 64-bit.
It is also included with N2KAnalyzer and N2KView.
This release has a digitally signed driver for the Maretron USB100 NMEA 2000®/USB gateway that is compatible with Windows XP (Service Pack 3 and later) 32-bit and 64-bit, Windows Vista 32-bit and 64-bit.
This driver is no longer supported and is only provided for legacy support.
Use N2KAnalyzer V3 to update the firmware on all Maretron devices through the NMEA 2000® bus. All required firmware image files for these devices are included with the N2KAnalyzer® tool. Once you have downloaded and installed the latest version of N2KAnalyzer®, you have the latest firmware for all your Maretron® devices on your computer and can update them without needing to make another Internet connection.
Download the latest version of N2KAnalyzer® from the Software Tools section to update the firmware on your devices.
Maretron's N2KAnalyzer® V3 software allows you to view NMEA 2000® messages as well as update firmware on all field-updateable Maretron® hardware products.
Use N2KAnalyzer V3 to update the firmware on all Maretron devices through the NMEA 2000® bus. All required firmware image files for these devices are included with the N2KAnalyzer® V3 tool. Once you have downloaded and installed the latest version of N2KAnalyzer® V3, you have the latest firmware for all your Maretron® devices on your computer and can update them without needing to make another Internet connection.
N2KAnalyzer® V3 requires the use of a Maretron® IPG100 or USB100 gateway to connect your PC to the NMEA 2000® bus. NMEA 2000® gateways from other manufacturers are not compatible with N2KAnalyzer®.
IF YOU ARE RUNNING N2KANALYZER VERSION 2.1.14, YOU WILL NEED TO MANUALLY DOWNLOAD AND INSTALL N2KANALYZER V3. VERSION 2.1.14 WILL NOT AUTOMATICALLY UPDATE TO A NEWER VERSION!
N2KBuilder® software is a powerful, free PC-based tool for designing and verifying the integrity of NMEA 2000® networks. N2KBuilder® software, when installed on a Windows PC and used as part of an integrated design workflow, can be used to layout, document, and validate the design of complex NMEA 2000® networks. In addition, it will directly produce a Bill of Materials (BOM) for Maretron® products, eliminating guesswork and transcription errors.
Once installed, N2KView® will check the Maretron® servers for updates if connected to the internet. If an update is available, the user will be requested to install the update directly from N2KView®. There should be no need to request updates from this page.
If you are still using N2KView® version 2.x or 3.x, please use this link to update to version 6.x
If N2KView is installed or updated using the above link, it is not necessary to install N2KServer. If N2KView reports that N2KServer is out of date, then use this link to download the latest version of N2KServer. N2KServer will not run on a Mac.
NOTE: A Maretron N2KView®/N2KServer® hardware license key is required to use this product with N2KView.
Before installing N2KView, please download and install Adobe AIR from airsdk.harman.com/runtime
Once installed, N2KView® will check the Maretron® servers for updates if connected to the internet. If an update is available, the user will be requested to install the update directly from N2KView®. There should be no need to request updates from this page.
It is not possible to update N2KView from a 6.0.x version to N2KView 6.3.x. Please contact Maretron Support to get details of how to do a full image update.
N2KExtractor software loads data to graph or produce .csv files from
From version 3.0.1 of N2KExtractor, you are now able to erase a USB drive directly on the PC from within N2KExtractor. This functionality is dependant on new disk drivers that are not installed when the automatic update function is run from within N2KExtractor. For this reason, it is recommended that the update to N2KExtractor version 3.0.1 is done from the above link.
Once installed, N2KExtractor® will check the Maretron® servers for updates if connected to the internet. If an update is available, the user will be requested to install the update directly from N2KExtractor®. There should be no need to request updates from this page.
